Model – SQ169HE Test Kiln 240 or 208 volt
Inside dimensions: 16.5″ wide x 9″ deep, fires to cone 10 – 2350°F/1260°C
Test kiln models are built with the Olympic proven electrical box design which has heat shields with top and bottom perforations to keep the electrical components cool. Balanced heating elements provide even heating of the firing chamber under all firing conditions. These models come equipped with a pilot light, metal stand, stainless steel jacket, and Bartlett 3K-CF electronic controller. Data is entered by scrolling through the up and down arrows for the desired cone fire or ramp/hold programming. One-year Limited Kiln Warranty for cone 10 models.
Options include upgrading to the KilnStar digital controller or Genesis touchscreen controller, Type S thermocouple, vent, and much more!
Furniture kits are available for the Test kilns. The furniture kits include two shelves, an assortment of small 1” x 1” square posts, and a one-pound bag of kiln wash.
Specific Kiln Information
|Model||SQ169HE||Wiring Specifications||1 Phase|
|Equipped with Lid Lift Assist||Optional||Volts||208||240|
|Inside Chamber Dimensions w x d x h (inches)||16.5 x 16.5 X 9||Amps||17||15|
|Outside Dimensions with Stand or Frame w x d x h (inches)||26 X 22 X 24||Breaker Required||20 Amp||30 Amp|
|Brick Thickness||3”||Plug Configuration||NEMA 6-30|
|Maximum Temperature||Cone 10-2350°F/1288°C||Copper Wire Size||#12, #10 if the circuit is longer than 40 ft|
|Est Ship Wt||190 lbs.|