HotBox E runs on 120 volts and is equipped with electronic control
Inside dimensions: 6.5″ x 6.5″ wide x 6.5″ deep, fires to cone 10/2350°F
120-volt electric kiln models come equipped with pilot light, metal stand, stainless steel jacket, and Bartlett 3K-CF electronic controller. Data is entered by scrolling through the up and down arrows for the desired cone fire or ramp/hold programming.
Furniture Kits for 120-volt models provide 2-3 layers of shelving for stacking ware, assorted small square posts, and a one-pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts in the quantities required.
Specific Kiln Information
|Model||HotBox E||Wiring Specifications|
|Equipped with Lid Lift Assist||N/A||120 Volts|
|Inside Chamber Dimensions w x d x h (inches)||6.5 x 6.5 x 6.5||15 Amps|
|Cubic Feet||.16||1800 Watts|
|Outside Dimensions with Stand or Frame w x d x h (inches)||16 x 16 x 15.5||20 Amp Breaker Required|
|Brick Thickness||2.5”||Plug Configuration: NEMA 5-15|
|Maximum Temperature||Cone 10 – 2350°F/1288°C||Copper Wire Size: #12, #10 if the circuit is longer than 40 ft|
|Est Ship Wt40||40 lbs.|