Model – 1818E Stackable Electric Kiln 240 or 208 volt
Inside dimensions: 17.5″ wide x 18″ deep, fires to cone 8/2300°F
Stackable electric models are built with the Olympic proven electrical box design which has heat shields with top and bottom perforations to keep the electrical components cool, and balanced heating elements insure even heating of the firing chamber under all firing conditions.
These models come equipped with a pilot light, metal stand, stainless steel jacket, and Bartlett 3K-CF electronic controller. Data is entered by scrolling through the up and down buttons for the desired cone fire or ramp/hold programming. Two-Year Limited Kiln Warranty.
Options include upgrading to the Genesis touchscreen controller or the 12 key digital Bartlett V6-CF controller for more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip step, and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy lookup of temperature and cone number equivalents. Additional options include Type S thermocouple, 480 volts, 2 or 3 zone control, vent, and much more!
Specific Kiln Information
|Model||1818E||Wiring Specifications||1 Phase|
|Equipped with Lid Lift Assist||Optional||Volts||208||240|
|Inside Chamber Dimensions w x d x h (inches)||17.5 x 18||Amps||24||21|
|Outside Dimensions with Stand or Frame w x d x h (inches)||30.5 x 31||Breaker Required||30 Amp|
|Brick Thickness||2.5”||Plug Configuration||NEMA 6-30|
|Maximum Temperature||Cone 8-2300°F/1260°C||Copper Wire Size||#10, #8 if the circuit is longer than 40 ft|
|Est Ship Wt||165 lbs|