VentMaster Downdraft Vent System

VentMaster-downdraft vent system for electric kilns

During operation, the Kiln Vent system keeps the kiln under slight negative pressure. This pulls the fumes out of the kiln and pulls in a small amount of fresh air. Firing times are the same. The fumes are exhausted directly into a duct system and removed from the kiln room. Improved airflow in the kiln results in more uniform temperatures, reducing hot and cold spots.

The VentMaster Expansion Kit allows two electric kilns to run off the same vent.

Technical Specifications
VentMaster 115V, 60 Hz., 1.1 amp
208-240 Volt, 50/60 Hz., .5 amp
Motor 73 CFM1 Weight 10 lbs. (4.5 kgs)
Hose 3-foot High-Temperature Hose

“Cubic Feet per Minute”. Normal room conditions will replenish the air; no need for a makeup air system.
The available VentMaster Extender Kit extends the length by an additional three feet.

VentMaster Expansion Kit

The VentMaster Expansion Kit allows two electric kilns to run off the same vent.