Model – TopHat 2814E/240 or 208 volts
Inside dimensions: 28 ¼ ” wide x 13½ ” deep, fires to cone 10/2350°F
The TopHat 2814E is built with 3″ brick and equipped with a lid element for glass fusing. The model comes equipped with a pilot light, welded frame, stainless steel jacket, and Bartlett 3 Key electronic controller. Data is entered by scrolling through the up and down arrows for the desired cone fire or ramp/hold programming,
Additional options include upgrading to the Genesis touchscreen controller or to the12 key digital Bartlett V6-CF or RTC-1000 controller for more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip-step, and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy lookup of temperature and cone number equivalents. Other options include Type S thermocouple, castors, vent, and much more!
Furniture Kits for Electric Raku and TopHat models provide 2-3 layers of shelving, assorted posts, and a one-pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts in the quantities required.
Specific Kiln Information
|Model||TopHat 2814E||Wiring Specifications||1 Phase|
|Equipped with Lid Lift Assist||N/A||Volts||208||240|
|Inside Chamber Dimensions w x d x h (inches)||28 1/4 x 13.5||Amps||55||48|
|Outside Dimensions with Stand or Frame w x d x h (inches)||49 x 36 x 66||Breaker Required||70 Amp||60 Amp|
|Brick Thickness||3”||Plug Configuration||Direct Wired||NEMA 6-50|
|Maximum Temperature||Cone 10-2350°F/1288°C||Copper Wire Size||#6, #4 if the circuit is longer than 40 ft|
|Est Ship Wt||375 lbs|