Medallion Artist Series 1823HE – Model MAS1823HE 240 or 208 volt
Inside dimensions: 17.5″ wide x 22.5″ deep, fires to 2350°F
Olympic Kilns Medallion Artist Series models can be fired every day with high-performance heating and controlled cooling providing perfect firings every time. The kilns are built with 3” brick providing extra insulation and energy efficiency. Olympic’s proven electrical box design with heat shields and top and bottom perforations keep the electrical components cool, and balanced heating elements insure even heating of the firing chamber under all firing conditions. The model comes equipped with a pilot light, metal stand, stainless steel jacket, and Bartlett 3K-CF electronic controller. Data is entered by scrolling through the up and down buttons for the desired cone fire or ramp/hold programming, One-year Limited Kiln Warranty.
Upgrade to the Genesis touchscreen controller or the 12 key digital Bartlett V6-CF controller or RTC-1000 controller for more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip-step, and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy lookup of temperature and cone number equivalents. Other options include Lid Lift Assist, 480 volts, 2 or 3 zone control, vent, and much more!
Specific Kiln Information
|Model||MAS1823HE||Wiring Specifications||1 Phase|
|Equipped with Lid Lift Assist||Optional||Volts||208||240|
|Inside Chamber Dimensions w x d x h (inches)||17.5 x 22.5||Amps||30||26.25|
|Outside Dimensions with Stand or Frame w x d x h (inches)||31.5 x 36.5||Breaker Required||40 Amp||40 Amp|
|Brick Thickness||3”||Plug Configuration||NEMA 6-50|
|Maximum Temperature||Cone 10-2350°F/1288°C||Copper Wire Size||#8, #6 if the circuit is longer than 40 ft|
|Est Ship Wt||215 lbs|