DOLL E/TEST E electric kiln equipped with 3K-CF electronic controller 120 volt
Inside dimensions: Oval – 11.25″ wide x 7″ front-to-back x 9″ high, .3 cu. ft., fires to cone 10/2350°F
Two names for one kiln? Initially, the Doll E was a primary kiln purchase for artists making dolls and later became a hot ticket item for labs, universities testing glaze, tiles, etc. because of the oval design. Olympic kept both names for the model so that customers who purchased the model for either reason would recognize it if they needed future purchases or parts.
120-volt models come equipped with pilot light, metal stand, stainless steel jacket, and Bartlett 3K-CF electronic controller. Data is entered by scrolling through the up and down arrows for the desired cone fire or ramp/hold programming.
Options include upgrading to the Genesis touchscreen controller or the 12 key digital Bartlett V6-CF controller for more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip step, and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy lookup of temperature and cone number equivalents.
Furniture Kits for 120-volt models provide 2-3 layers of shelving for stacking ware, assorted small square posts, and a one-pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts in the quantities required.
Specific Kiln Information
|Model||DOLLE/TEST E||Wiring Specifications|
|Equipped with Lid Lift Assist||N/A||120 Volts|
|Inside Chamber Dimensions w x d x h (inches)||11.25 x 7 x 9||15 Amps|
|Cubic Feet||0.3||1800 Watts|
|Outside Dimensions with Stand or Frame w x d x h (inches)||17 x 17.5 x 22.5||20 Amp Breaker|
|Brick Thickness||2.5”||Plug Configuration: NEMA 5-15|
|Maximum Temperature||Cone 10 – 2350°F/1288°C||Copper Wire Size: #12, #10 if the circuit is longer than 40′|
|Est Ship Wt||60 lbs|